Set open parameters

Set the resolution of image

Using the params.stream_mode parameter, you can set the resolution of the image.

Attention: Now image resolution supports 4 types: 640X480,1280x720 for single camera. 1280x480, 2560x720 for left and right camera.

Reference code snippet:

// Stream mode: left color only
// params.stream_mode = StreamMode::STREAM_640x480;  // vga
// params.stream_mode = StreamMode::STREAM_1280x720;  // hd
// Stream mode: left+right color
// params.stream_mode = StreamMode::STREAM_1280x480;  // vga
params.stream_mode = StreamMode::STREAM_2560x720;  // hd

Set the frame rate of image

Using the params.framerate parameter, you can set the frame rate of image.

Note

The effective fps of the image(0-60) - The effective fps of the image in 2560x720 resolution (30)

Reference code snippet:

// Framerate: 30(default), [0,60], [30](STREAM_2560x720)
params.framerate = 30;

Set color mode

Using the params.color_mode parameter,you can set the color mode of image.

COLOR_RAW is original image, COLOR_RECTIFIED is rectified image.

Reference code snippet:

// Color mode: raw(default), rectified
// params.color_mode = ColorMode::COLOR_RECTIFIED;

Set depth mode

Using the params.depth_mode parameter,you can set the depth mode.

DEPTH_COLORFUL is colorful depth image,DEPTH_GRAY is grey depth image, DEPTH_RAW is original depth image。

Reference code snippet:

// Depth mode: colorful(default), gray, raw
// params.depth_mode = DepthMode::DEPTH_GRAY;

Enable auto exposure and auto white balance

Set params.state_ae and params.state_awb to true , you can enable auto exposure and auto white balance.

By default auto exposure and auto white balance are enabled,if you want to disable,you can set parameters to false .

Reference code snippet:

// Auto-exposure: true(default), false
// params.state_ae = false;

// Auto-white balance: true(default), false
// params.state_awb = false;

Enable IR and its adjustments function

Using the params.ir_intensity parameter,you can set IR’s intensity of image. Enabling IR is setting params.ir_intensity greater than 0. The greater the value, the greater the IR’s intensity.(max is 10).

Reference code snippet:

// Infrared intensity: 0(default), [0,10]
params.ir_intensity = 4;

Note

After turning this fuction on, you can see ir pattern:

../_images/ir.png

Enable IR Depth Only

Using the params.ir_depth_only parameter,you can set IR Depth Only function. This is disabled by default. After turning this function on, IR only works on depth images. IR pattern will not show in color images.

Note

This function doesn’t work on 15 frame rate below. After turning this function on, frame rate will be divided equally.For example,when set frame rate of image to 30 fps, the frame rate of color image is 15 fps. The frame rate of depth image is 15 fps too.

Reference code snippet:

// IR Depth Only: true, false(default)
// Note: IR Depth Only mode support frame rate between 15fps and 30fps.
//     When dev_mode != DeviceMode::DEVICE_ALL,
//       IR Depth Only mode not be supported.
//     When stream_mode == StreamMode::STREAM_2560x720,
//       frame rate only be 15fps in this mode.
//     When frame rate less than 15fps or greater than 30fps,
//       IR Depth Only mode will be not available.
// params.ir_depth_only = false;

Adjust colour depth value

Using the params.colour_depth_value parameter, The value is 5000 by default.

Reference code snippet:

// Colour depth image, default 5000. [0, 16384]
// params.colour_depth_value = 5000;

Reference running results on Linux:

Open device: 0, /dev/video1

D/eSPDI_API: SetPropertyValue control=7 value=0D/eSPDI_API: SetPropertyValue control=7 value=35D/eSPDI_API: SetPropertyValue control=7 value=1-- Auto-exposure state: enabled
D/eSPDI_API: SetPropertyValue control=7 value=0D/eSPDI_API: SetPropertyValue control=7 value=12D/eSPDI_API: SetPropertyValue control=7 value=1-- Auto-white balance state: enabled
-- Framerate: 5
D/eSPDI_API: SetPropertyValue control=7 value=4 SetDepthDataType: 4
-- Color Stream: 1280x720 YUYV
-- Depth Stream: 1280x720 YUYV

D/eSPDI_API: SetPropertyValue control=7 value=0D/eSPDI_API: SetPropertyValue control=7 value=3D/eSPDI_API: SetPropertyValue control=7 value=4
-- IR intensity: 4
D/eSPDI_API: CVideoDevice::OpenDevice 1280x720 fps=5

Open device success

Note

After changing the parameters, you need to run in the sdk directory

make samples

to make the set parameters take effect.

Complete code samples,see get_image.cc .